近年来，透水地坪材料密封固化剂已广泛用于工厂车间。效果非常好，受到消费者的高度赞扬。车间透水地坪材料密封固化剂地板施工应考虑哪些因素?下面就由上海艺术地坪供应商小编为大家介绍一下吧!
在建造车间时应考虑以下因素：
1.启动车间也很重要。它是检查地板的磨损程度。大磨损的地方通常是车辆的通道和其他常用的地方。用于混凝土密封固化剂地板的施工。加强剂量，特殊处理。
2.对于其他货物和流动装配区域，应考虑物品对地面的影响，并加强混凝土密封固化剂的用量。
3.地板质量会因外部温度的变化而发生变化，因此在车间施工中，应根据设备，产品及附近区域的温度控制混凝土密封固化剂的用量。
4.在施工过程中的防滑要求也是必不可少的，通常在使用混凝土密封固化剂后，为了提高亮度，会加入光亮剂。使用双奇时，无需再添加光亮剂，亮度更高，达到防滑要求。
5.根据车间的使用情况，考虑是否存在潜在的化学反应，或与化学品直接接触会导致地面腐蚀，因此有必要根据情况准确建造。
6.许多行业对车间的卫生要求严格。例如，食品，化妆品等，都需要符合国家GMP标准。因此，地面应保持卫生，并达到无尘效果。制作混凝土密封固化剂时，应均匀，防止粉尘和沙子控制。
In recent years, the sealing curing agent of permeable floor material has been widely used in factory workshops.The effect is very good, highly praised by consumers.What factors should be considered in floor construction of pervious floor material sealing curing agent?Below by Shanghai art floor xiaobian for you to introduce it!
The following considerations should be taken into account when building a workshop:
It is also important to start the workshop.It is to check the wear of the floor.Areas of heavy wear are usually vehicle access and other common areas.Used for concrete sealing curing agent floor construction.Enhanced dose, special treatment.
2. For other goods and mobile assembly areas, the impact of items on the ground should be considered, and the dosage of concrete sealing curing agent should be strengthened.
3. Floor quality will change with the change of external temperature, so in the workshop construction, the amount of concrete sealing curing agent should be controlled according to the temperature of equipment, products and the surrounding area.
4. The requirement of anti-slip in the construction process is also essential. Usually after the concrete sealing curing agent is used, brightener will be added in order to improve the brightness.When using double odd, no need to add brightener, brightness is higher, to meet the requirements of anti-slip.
5. Based on the use of the workshop, consider whether there is a potential chemical reaction or whether direct contact with the chemical will lead to ground corrosion. Therefore, it is necessary to build accurately according to the situation.
6. Many industries have strict requirements on the sanitation of workshops.For example, food, cosmetics, etc., all need to comply with the national GMP standard.Therefore, the ground should be kept clean and dust-free.When making concrete sealing curing agent, it should be even to prevent dust and sand control.
